pulse interval
英 [pʌls ˈɪntəvl]
美 [pʌls ˈɪntərvl]
网络 脉冲间隔; 脉冲间隙; 脉冲间歇
双语例句
- Currently, the PM ( Pulse Interval Modulate) technique is used in Most of the Laser semi-active guided weapons.
当前，激光半主动制导武器的制导信号大多采用脉冲时间间隔调制技术进行编码。 - Fixed Length Dual-Amplitude Pulse Interval Modulation for Optical Wireless Communications
无线光通信中的定长双幅度脉冲间隔调制 - The interval time between the two interfacing output-driving voltages is called as pulse interval.
相邻二个输出驱动电压之间的间隔时间，称为脉冲间隔。 - Pulse Interval Measurement About Rocket Time Bunchs
火箭时串信号脉冲间隔测量 - Contrast of photoelectric output signal and its relationship to the error of counting pulse interval in laser interferometry
激光干涉测长仪中光电输出信号的对比度及其与计数脉冲间隔误差的关系 - A novel dual-amplitude pulse interval modulation ( DAPIM) for optical wireless communications is discussed.
提出一种新的调制方法&双幅度脉冲间隔调制（DAPIM）。 - Through the analysis of experiment data, the law of influence of strengthening layer and surface quality has been studied under different process parameters such as peak current, pulse width, pulse interval and processing period.
通过分析实验数据，研究了峰值电流、脉宽、脉间和加工时间等不同工艺参数对强化层厚度和表面质量的影响规律。 - With the increasing of pulse interval, the influence it gives must be opposite.
脉冲间隔增加时，其影响则相反。 - Spectrum Analysis of Pulse Interval Modulation Signals
脉冲间隔调制信号的谱分析 - The frequency spectrum and characteristics of pulse interval and width modulation ( PIWM) are derived in detail.
推导了非同步型脉冲间隔与宽度双重调制（PIWM）的频谱及其特点。 - The performances of dual-header pulse interval modulation ( DH-PIM) and digital pulse interval modulation ( DPIM) are analyzed for the high packet error rate and low information transmission rate of optical wireless communication modulations presently.
为了解决目前无线光通信采用的调制方式误包率大、传信率低等问题，研究了双头脉冲间隔调制（DH-PIM）和数字脉冲间隔调制（DPIM）的性能。 - Digital pulse interval modulation for atmospheric optical wireless communications
大气无线光通信系统中数字脉冲间隔调制研究 - Based on Q switched diode-pumped solid-state ( DPSS) Nd: YAG laser, the single pulse interval laser surface micro-machining technology was adopted to machine the surface of gray cast iron.
在声光调Q二级管泵浦固体光源（DPSS）Nd：YAG激光器基础上，采用单脉冲同点间隔多次激光微加工工艺，对灰铸铁材料进行表面微造型加工。 - It is observed that the material remove rate ( MRR) and surface roughness ( SR) increase with the increase of pulse duration and peak current, and decrease with the increase of pulse interval in the range of the experimental data.
在试验加工的范围内，工件的蚀除速度和表面粗糙度值随脉冲宽度和峰值电流的增加而增加，随脉冲间隔的增加而减小。 - Power line communication technique of carrier digital pulse interval modulation and transceiver
载波数字脉冲间隔调制电力线通信技术与收发器 - Experimental results show that, this scheme has several advantages, such as easy adjusting for pulse amplitude and pulse interval, large output power, low cost and easy fabrication.
实验结果表明，这一时分复用信号产生方案具有脉冲的幅度和间隔易于调节、输出信号的功率大、成本低且易于实验室拉制等优点。 - Research on the Parabola Interpolation Based on Pulse Interval Interpolation
脉冲间隔法抛物线插补的研究 - Taking the workpiece thickness, peak value current, pulse width and pulse interval as input data, and the processing speed and surface roughness as output data, to establish technological models for fast Wire Cut processing respectively with neural network technology and nonlinear regression theory.
以工件厚度、峰值电流、脉冲宽度、脉冲间隔为输入参数，以加工速度和表面粗糙度为输出参数，分别用神经网络技术与非线性回归理论建立了快走丝线切割加工的工艺模型。 - A Study of TDM With Timed Pulse Interval Modulation
定时脉冲间隔调制时分多路复用的研究 - Effects of electrode polarity, pulse duration, pulse interval, open-circuit voltage, peak current, grain size of graphite electrode and workpiece material on EDM characteristics of graphite electrode were studied through a lot of experiments and analysis.
通过大量的电加工实验和多种测试手段，研究了电极极性、脉冲宽度、脉冲间隔、开路电压、峰值电流、石墨颗粒尺寸和工件材料对石墨电极电火花加工的影响规律。 - Pulse interval and width modulation for photoelectric measurement with optical fiber transmission
光纤传输光电检测脉冲间隔与宽度双重调制 - An expression of spectrum for asynchronous analog pulse interval modulation signal using a static approachable method is given in this paper. The result is simple, and the physical concept is clear. It has been confirmed by an experiment simultaneously.
采用静态逼近方法，求出非同步模拟脉冲间隔调制信号简单而物理概念明确的谱表示，并由实验结果确认。 - The discussion is the extension of the pulse interval interpolation, which can be accepted by the beginner.
这种探讨是对脉冲间隔法的延伸，易被初学者接受。 - The is design of six programs pulse generator& Program pulse duration is 4 times clock pulse interval
六个顺序脉冲发生器的设计&顺序脉冲宽度是时钟脉冲周期的四倍 - The experimental results showed that the recovery time of the main gap was an important effect factor on the pulse interval of the modulator.
分析表明主开关恢复时间是影响调制器输出脉冲时间间隔的主要因素。 - Signal conditioning system is responsible for sending the initial pulse, detecting the echo signal, measuring the precision pulse interval, data filtering and processing.
传感器信号调理系统负责起始脉冲发送、脉冲驱动放大、回波信号检测、高精度脉冲时间间隔测量、数据滤波及处理等。 - According to different experiment objects, the spectrometer can measure accurately the fluorescence attenuation curve and time resolution spectrum in the range of ps, ns and μ s by choosing suitable laser pulse interval.
按照不同的实验对象，选择合适的激光脉冲间隔，光谱仪可以准确测量皮秒、纳秒和微秒时间范围的荧光衰减曲线和时间分辨光谱。 - By analyzing the law of WEDM processing, this article selects the main factors affecting process: the thickness of the work-piece, pulse width, pulse interval, pulse height, as the input vectors.
本文通过对电火花线切割加工工艺规律的分析，选取影响工艺效果的主要因素：工件厚度、脉冲宽度、脉冲间隔、脉冲高度，作为输入向量。 - The driver operates in the pulse mode, and can generate drive signal whose repeat frequency and pulse interval is tunable.
驱动器工作在脉冲模式下，产生重复频率和脉冲间隔可调的驱动信号。